Advanced search
Start date
Betweenand

Production and characterization of nanocrystaline alloys of Ti-Mo-Fe-Sn system

Grant number: 12/06326-2
Support type:Scholarships in Brazil - Scientific Initiation
Effective date (Start): June 01, 2012
Effective date (End): May 31, 2014
Field of knowledge:Engineering - Materials and Metallurgical Engineering - Physical Metallurgy
Principal researcher:Conrado Ramos Moreira Afonso
Grantee:Marina de Oliveira Antunes Rocha
Home Institution: Centro de Ciências Exatas e de Tecnologia (CCET). Universidade Federal de São Carlos (UFSCAR). São Carlos , SP, Brazil

Abstract

The synthesis of new Ti-based BMG alloys has been carried out because of their good engineering properties. These alloys are industrially important as structural and functional materials. Ti-based BMG alloys exhibit high strength (1800-2500 MPa), low elastic modulus (90-110 GPa), and, as expected, good corrosion resistance in various solutions. The Ti45Zr10Pd10Cu31Sn4 BMG discovered recently exhibits a good combination of high mechanical properties, and corrosion resistance (chemical biocompatibility) and it is suitable for the production of alloys with the high glass-forming ability (GFA). The increasing life expectancy turns necessary the scientific and technological development of biomaterials, mainly those with orthopedic applications. This research aims at the production, processing, and optimization of properties in ² Ti-Mo-Fe-Sn alloys for the fabrication of lower cost prosthesis for total hip replacement. The metallic alloys applied nowadays in Brazil have a much higher elastic modulus (E) than the one of human bone (E = 10 to 30 GPa): Stainless Steel (200 GPa), Co-Cr Alloys (220 GPa), Ti-6Al-4V (110 GPa) and the search for alloys with enhanced mechanical and chemical biocompatibility is necessary. In this project are proposed new composition of Ti BMG alloys through combinations in the system Ti-Mo-Fe and the one which shows the best combination of properties will be submitted to different additions of tin (Sn) with the aim of optimizing mechanical properties, avoiding the formation of metastable omega phase (É) together with better biocompatibility (mechanical and chemical). It is desired a low elastic modulus of the alloy and the decrease in the melting point by the addition of eutectoid ²-stabilizing elements (Fe and Sn). The aim of the research project is the microstructure characterization of Titanium alloys in Ti-Mo-Fe-Sn system since the production of the alloy in an arc furnace, homogenization heat treatment, metallography, X-ray diffraction (XRD), optical (OM), and scanning electron microscopy (SEM) in order to obtain nanocrystalline composites, metastable and/or amorphous Ti alloys and the crystallization sequence study of equilibrium phases.(AU)

News published in Agência FAPESP Newsletter about the scholarship:
Articles published in other media outlets (0 total):
More itemsLess items
VEICULO: TITULO (DATA)
VEICULO: TITULO (DATA)

Please report errors in scientific publications list by writing to: cdi@fapesp.br.